Design and performance simulation of multi-stream, plate-fin heat exchangers. 中油奧特科技有限公司自2003年起即負責Aspen Plate Fin Exchanger軟件在國內的推廣和銷售，全面負責Aspen Plate Fin Exchanger軟件在中國的推廣、培訓和技術支持。
(1)計算模式
- 設計：根據各流股的工藝條件，用簡捷法計算出冷箱的幾何尺寸及通道層數
- 核算：給定進出口狀態，核算換熱器
- 模擬：給定冷箱的幾何尺寸、通道層數及進口狀態，計算出口狀態
(2)流道分配模擬：
- 計算給定冷箱每一流道的操作特性（最大流道數可達 240 ）�？深A測冷箱的橫斷面翅片溫度分布，從而可對各種流道分配方案進行研究。
(3)熱虹吸式冷箱計算，流股分配方案分析及并流、錯流分析
(4)冷箱類型
- 冷箱最大流股數可達 15 股。流股之間換熱形式可采取逆流、并流、錯流。單一冷箱或多個單元串、并組合的復合冷箱，這些冷箱可以垂直式或水平式。熱虹吸式冷箱可以是內置式（內潛在液室中）或外置式（通過管道和塔底的液室連在一起）。
(5)分配器的類型
- 分配器可以計算進口和出口分配器的擴張壓降，可以檢查流量分布是否均勻，再分配器有合并型、分支型、也可部分流股抽出。
(6)翅片特性數據
- 可以通過輸入界面人工輸入翅片的傳熱及壓降特性數據（平直、多孔、波紋 / 人字型、鋸齒、片條），若沒有廠家數據，可根據軟件內部的特性曲線求出翅片特性。由于深入及獨特的研究工作， HTFS 對處理翅片通道的沸騰和冷凝流體流動有獨特的方法。
(7)程序組成
- PFIN—— 簡捷計算：首次計算板翅式換熱器時首先用它計算換熱器的基本尺寸
- MUSE—— 標準計算：按標流道分布計算換熱器
- MULE—— 流道分布校正及手工進行流道分布
- MUSC—— 錯流校正
Aspen MUSE performs a detailed simulation of multi-stream, plate-fin heat exchangers made from brazed aluminum, stainless steel, or titanium. It can be used standalone by the thermal specialist for exchanger design or as an integrated product with AspenTech's steady-state process simulation program, Aspen HYSYS. Aspen MUSE is a core element of AspenTech's aspenONE Process Engineering applications.
Features
- Research Based Correlations : Provides models and correlations based on more than 35 years of Aspen HTFS proprietary research, assuring users of reliable designs.
- Design Mode : Calculates the geometry for a given set of process inlet and outlet conditions.
- Simulation Mode : Calculates the outlet conditions and performance of a given exchanger from specified inlet conditions.
- Layer Simulation : Calculates the performance of every layer in a given exchanger from specified inlet conditions. The metal temperatures across the exchanger are also predicted to enable an assessment of the layer patterns.
- Up to 20 Process Streams : Up to 20 process streams in co-current, counter-current, or crossflow with any complexity of exchanger inlet and outlet geometry.
- Single Phase, Boiling and Condensing
- Physical Properties : Specify fluid physical properties, import them from a process simulator, or get MUSE to calculate them using the Aspen COMThermo? properties package.
- Exchanger Diagrams : Provides guidance for input data review.
- Integrated with Aspen HYSYS : High-level runtime integration enables engineers to rigorously model heat exchanger operation within the context of the overall process.
Benefits
- Improved Design : Ideal for manufacturers, engineering companies, and owner operators that require a robust, flexible program with accurate heat transfer and pressure drop methods. Aspen MUSE provides this in a unique commercial package supported by authoritative research-based methods and validation.
- Improved Process Operations : Rigorous simulation of multi-stream, plate-fin units allows process engineers to optimize performance of LNG, ethylene, and air separation plants.
- Increased Engineering Efficiency : Internationally accepted Aspen MUSE simulations can be used to evaluate vendor plate-fin designs with confidence.
|
